(DO NOT connect cable to your computer yet. Only do this when you're instructed below.)

1. Note: Some cable drivers are not available for download on this page. They are available after you install the Intel Quartus Prime software in the drivers directory. Table 1 provides driver installation and set-up procedures for the Windows. versions of the Intel.
2. The Motorola USB Driver helps you to connect your Motorola Smartphone and Tablets to the Windows Computer, without installing the Motorola PC Suite Application. Below you can find the list of Motorola Drivers for various Motorola devices.
3. Amsamotion plc programmable cable driver download. You can find different version plc cable driver from here.

Driver Installation Instructions (Windows/Linux/Mac) PDF Manual: Windows USB Driver (zip format) v2.08.14 Use this download to manually install the driver as described in the PDF instructions above. Windows Driver: Windows USB Driver (self extracting preinstaller format) v2.08.14 Note the preinstaller may only be used before the AXE027 is first.

Start by downloading the VAG-COM Driver Pack 1.

Here's how to install on different Windows versions...

Windows Vista, 7, 8, 8.1, 10:

Uncompress the file. Double-click on 'Install.exe' to install the drivers. When complete — plug in cable into any USB port on your computer and wait for automatic installation to complete.

If install is successful, move onto Step 2.

If installation fails, see below: Troubleshooting: If Drivers Failed To Install

Windows XP:

1. Uncompress the file. Double-click on 'Install.exe' to install the drivers.
2. Plug cable into any computer's USB port.
3. 'Found New Hardware Wizard' will start and it will ask you 'Can Windows connect to Windows Update to search for the software?'. Select 'Yes'.
4. Select 'Install the software automatically'.
5. After the installation is complete, click 'Finish'.
6. 'Found New Hardware Wizard' will start once again because there are two drivers for this cable.
7. Go through the same steps as explained above to install this second driver.

Download Nokia Flashing Cable Driver

If install is successful, move onto Step 2.

If installation fails, see below: Troubleshooting: If Drivers Failed To Install

Troubleshooting: If Drivers Failed To Install:

Installation failed? Download here VAG-COM Driver Pack 2.

Unextract the file into any folder. Then while your cable is connected to the computer — go Device Manager.

• Windows Vista/7/8/10: Control Panel » System » Device Manager
• Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

You'll see a device similar to 'USB Serial Port' under either 'Other devices' or 'Ports (COM & LPT)'.

Right-click and choose 'Update Driver Software'. Like this:

Then select the location where you unextracted Driver Pack 2. Let it install.

Go to Control Panel.

• Windows Vista/7/8/10: Control Panel » System » Device Manager
• Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

Expand 'Other devices' or 'Ports (COM & LPT)'. Whichever contains 'USB Serial Port'.

Next to 'USB Serial Port' — you'll see a number.

Nokia Cable Driver Download

If the COM port number is between 1-4, then everything is fine. Move onto Step 3.

If the COM port number is above 4, then we'll have to change it so it's between 1-4. Here's how...

Download Vb Cable Driver

Cable should be plugged into computer.

1. Start VCDS-Lite software.
2. Click 'Options' button.
3. You will see 'Select COM Port' box. Select the 'COM Port' number as explained in Step 2.
4. Click the ‘Test’ button.
5. If everything is good, it should display 'Interface Status: Found!'.
6. You can now connect other end of cable to car. Turn on ignition. And you're ready to start diagnosing!

If test is not successful — check the following:

1. Other software or devices using USB ports or that same COM Port could be conflicting. You should uninstall the suspected software or device for troubleshooting this problem.
2. It should be noted that VAG-COM 409.1 KKL cable does not work on vehicles running on CAN-BUS System.
3. Cable must be plugged into the vehicle with ignition ON.
4. Test the cable with each COM Port from 1 to 4 in Windows Device Manager.
5. Make sure that the driver is installed and configured as explained in Step 1.

• Only Audi, Volkswagen, Skoda and Seat vehicles are supported. Other brands will only work for generic OBD-II functions.
• If VAG-COM 409.1 KKL cable doesn't connect — or if you get the error message 'Can't Synch Baud Rate' — then go to Options and set Start Baud to 9600. If 9600 doesn't work, try 4800 and 1200. Turn the vehicle's ignition OFF and back ON after each failed attempt to connect.
• If you have installed VCDS software before or from another source, uninstall all versions of VCDS software right now, and delete directory 'C:Ross-Tech'. Then install latest version of VCDS-Lite software by clicking here.

For further information and instructions for troubleshooting, visit the following links:

How to Install & Register VCDS-Lite software That Came With Your VAG-COM 409.1 KKL Cable